Chun-Jen Chen 陳俊仁
Job Title
Associate Professor
Department
Automation Engineering
Laboratory
Expertise
Automatic Optical Inspection(AOI), Machine Vision
cjchen@nfu.edu.tw
Introduction
Professor Chun-Jen Chen obtained a master’s degree from the Department of Mechanical Engineering of National Cheng Kung University in 2003 and a Philosophy Doctor degree from the Department of Mechanical Engineering of National Cheng Kung University in 2007. After receiving his degree, Professor Chen worked at the Instrument Technology Research Center of the National Applied Research Laboratories for six years (2008.1~2014.1). Professor Chen started teaching in the Department of Automation Engineering at National Formosa University in 2014. Professor Chen serve concurrently as the chair of the Department of Automation Engineering in 2022. Professor Chen’s expertise is in automatic optical inspection, machine vision, digital image processing, precision measurement, sensing and measurement. The subjects taught by Professor Chen include “Introduction to mechatronic systems”, “mechatronic system design”, “mechatronic system design experiments”, “advanced precision measurement”, “object-oriented programming”, and “digital image processing”.
English publications in recent 5 years:
1. Chun-Jen Chen, Yi-Hung Yang, “The development of a high-speed linear stage straightness measurement system using the industrial camera,” 15th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2023), September 17-20, 2023, Seoul, South Korea
2. Chun-Jen Chen, Yi-Hung Yang, “Using the digital camera and laser diode to build a straightness measurement system for linear stage,” The 20th International Conference on Automation Technology (Automation 2023), Dec. 8-10, 2023, Taipei, Taiwan
3. Hsuan-Wei Chang, Chun-Jen Chen, “The application of a line scan camera on the surface defect inspection of ceramic substrate with high and low-resolution measurement system,” Optics & Photonics Taiwan International Conference (OPTIC 2020), Dec. 3-5, Taipei, Taiwan
4. Chun-Jen Chen, Min-Yen Sung, Rong-Jen Kuo, Kuan-Liang Kuo, “ To develop a PLC-based vision alignment system with high-precision three-axis motorized stage,” International Conference on Advanced Technology Innovation 2019 (ICATI2019), July 15-18, 2019, Sapporo, Hokkaido, Japan
5. Wen-Yuh Jywe, Chun-Jen Chen, Chu-Ling Huang, Shin-Jyun Lin, Ming-Lun Hu and Jia-Xing You, “Development of Tool Monitoring System for Smart Machine Engine,” The 40th International MATADOR Conference on Advanced Manufacturing(MATADOR 2019), Hangzhou, Chin, July 8-10
English publications in recent 5 years:
1. Chun-Jen Chen, Yi-Hung Yang, “The development of a high-speed linear stage straightness measurement system using the industrial camera,” 15th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2023), September 17-20, 2023, Seoul, South Korea
2. Chun-Jen Chen, Yi-Hung Yang, “Using the digital camera and laser diode to build a straightness measurement system for linear stage,” The 20th International Conference on Automation Technology (Automation 2023), Dec. 8-10, 2023, Taipei, Taiwan
3. Hsuan-Wei Chang, Chun-Jen Chen, “The application of a line scan camera on the surface defect inspection of ceramic substrate with high and low-resolution measurement system,” Optics & Photonics Taiwan International Conference (OPTIC 2020), Dec. 3-5, Taipei, Taiwan
4. Chun-Jen Chen, Min-Yen Sung, Rong-Jen Kuo, Kuan-Liang Kuo, “ To develop a PLC-based vision alignment system with high-precision three-axis motorized stage,” International Conference on Advanced Technology Innovation 2019 (ICATI2019), July 15-18, 2019, Sapporo, Hokkaido, Japan
5. Wen-Yuh Jywe, Chun-Jen Chen, Chu-Ling Huang, Shin-Jyun Lin, Ming-Lun Hu and Jia-Xing You, “Development of Tool Monitoring System for Smart Machine Engine,” The 40th International MATADOR Conference on Advanced Manufacturing(MATADOR 2019), Hangzhou, Chin, July 8-10
